Akuvox X912S — Authorised Installer Brisbane & Gold Coast
The X912S is Akuvox’s vandal-resistant Linux IP door phone — 4-inch capacitive touchscreen, dual 2MP HDR cameras, multi-way access (face, EM/Mifare card, PIN, BLE, QR code), 316 stainless steel IP65/IK10 housing. Built for apartment foyers, body-corporate entries, and high-traffic commercial doors where the unit will take a beating.
Intercom Solutions is an authorised Akuvox installer for Brisbane, Gold Coast, and SE QLD. Owner-operated by Jarrod Edwards, apartment intercom specialist, QLD-licensed.
Akuvox X912S Specifications
| Specification | Detail |
|---|---|
| Front panel | 316 grade stainless steel |
| Display | 4-inch IPS LCD capacitive touchscreen |
| Operating system | Linux |
| Main camera | 1/2.8″ CMOS, 2MP, 125° horizontal FOV, HDR |
| Video | 1920×1080 @ 30fps (H.264) |
| Access methods | Face, EM/Mifare card, PIN, BLE, QR code |
| Power | PoE+ (IEEE 802.3at) or 12V DC |
| Network | 2× RJ45 (10/100 Mbps), SIP 2.0 |
| Protection | IP65 (dust/water) + IK10 (vandal resistance) |
| Dimensions (mm) | 234 × 94.5 × 34 |
The IP65/IK10 dual rating makes the X912S one of the toughest Akuvox door stations — outdoor weather exposure and intentional vandalism both covered. The dual-camera setup (one for video calls, one for face recognition anti-spoofing) is what apartment buildings need when residents are pressing the unit’s buttons in the rain at 11pm.
Where the X912S fits
- Apartment foyers (10–50 units): SIP 2.0 + face recognition lets residents bypass key cards. Integrates with Akuvox SmartPlus app for remote unlock.
- Body-corporate buildings: Resident directory loaded via Akuvox Cloud; QR codes for trade access.
- Commercial reception: 4″ screen displays company branding when idle.
- Retrofitting analogue intercoms: X912S sits on existing wallbox dimensions (US + EU compatible).
X912S vs X915 vs R29
- X912S — Linux, 4-inch screen, vandal-rated. Lower cost. Best for: tough environments where buttons get smashed.
- X915 — Android OS, 8-inch screen, dual starlight camera. Higher cost. Best for: high-end residential / boutique apartment entries.
- R29C — Android, 7-inch screen, dedicated face recognition camera (>99% accuracy, <0.6s). Best for: multi-dwelling buildings prioritising touchless entry.
Full breakdown: Akuvox vs 2N vs Aiphone comparison.
X912S installed cost in Brisbane
- Apartment retrofit (existing wallbox): $1,650–$2,200
- New install (new cable run + lock controller): $2,400–$3,400
- Multi-dwelling (10+ units, central panel + indoor stations): Quote per project
Quotes include configuration, SmartPlus app onboarding, and lifetime firmware update support.
Request a written X912S quoteFAQ
Is the Akuvox X912S NDAA compliant?
Akuvox has published an NDAA Compliance Statement covering its product range. Federal-government, embassy, or high-security buyers should request the current statement from Akuvox direct before specifying.
Does the X912S work with the Akuvox SmartPlus app?
Yes. Residents receive a SmartPlus invite via email or SMS; unlock-from-app, call answer, and remote viewing are standard. First 12 months SmartPlus SaaS included on every Intercom Solutions install.
Can I keep my existing handsets?
The X912S is SIP 2.0 only. Legacy 2-wire or analogue handsets need replacement with SIP indoor monitors (S562, IT83A) or a wall-mount handset.
How long does X912S installation take in Brisbane?
Single-door apartment retrofit: 3–5 hours on-site. Multi-dwelling install (10+ stations): 2–4 days for a full strata building.
What warranty applies?
Akuvox standard hardware warranty (24 months) plus Intercom Solutions workmanship warranty (12 months).